Unpacking and Installation
18 Operating Instructions Arium
®
Comfort I, Comfort II
5 Unpacking and Installation
We recommend that you have the set-up and initial startup of your Arium
®
Comfort system carried out by a qualified Sartorius service technician.
5.1 Unpacking
Remove your Arium
®
Comfort system from its packaging. You will find the
accessories inside the Arium
®
Comfort housing and in the top cover of the
box. The equipment supplied includes the following:
Part Description Quantity
Arium
®
Comfort system (with pre-installed RO module(s)) and,
on models used as a bench | wall-mounted system, with pre-
installed display | dispenser unit)
1
Feed water tubing with quick-fit adapter,
1
length 2.40 m
1
1
1
controlled dispensing with tubing)
1
diameter, length 2.40 m
1
Tubing for recirculating the pre-treated water from tank,
for connecting to Bagtank and to the Comfort system
(“Tank Inlet” tubing)
1
Wall mounting bracket display | dispenser unit
(on below-bench units)
1
3 m HDMI cable (on below-bench units) 1
(on below-bench units)
2
Wall mounting bracket (for wall-mounted systems) 1
Power cord 1
Operating instructions 1
QA certificate 1
length 2.40 m (EDI version only)
1
1
1
To Next Page
Loading...
