Malfunctions
84 Operating Instructions Arium
®
Comfort I, Comfort II
Error code Cause Display
0170 Inlet pressure
(on Comfort I version)
Input pressure too low
(≤ 0.5 bar)
Error 0170
Inlet pressure too low
An inlet pressure of > 0.5 bar
is required
OK
0170 Inlet pressure
(Comfort II version)
Input pressure too low
(≤ 2.0 bar)
Error 0170
Inlet pressure too low
An inlet pressure of > 2.0 bar
is required
OK
Error 170 stops water production. No backflushing is started.
t Check the input pressure. If required, set it to > 2 bar (recommended
value). Check whether or not the prefilter is clogged.
t Confirm the error message with OK.
y You will return to the operating mode display once the error has been
corrected.
All other error codes cannot be eliminated by the operator. Please contact
Service.
To Next Page
Loading...
