Sartorius Combics 2 CAIXS2 - Setup Menu (Device Settings); RESET Factory settings

Operating Instructions Combics CAIXS2 131
Menu Structure
setup / WP-1 / intern. Param.2
2ND.UNIT 2nd weight unit (depends on the weighing platform type) 3.1
1)
not for use in legal metrology
GRAM gram/g 3.1.2*
KILOGR. Kilograms/kg 3.1.3
CARAT carats/ct
1)
3.1.4
POUND pounds/lb
1)
3.1.5
OUNCE ounces/oz
1)
3.1.6
TROY.OZ. troy ounces/ozt
1)
3.1.7
HK TAEL Hong Kong taels/tlh
1)
3.1.8
SNG.TAEL Singapore taels/tls
1)
3.1.9
TWN.TAEL Taiwan taels/tlt
1)
3.1.10
GRAIN Grains/GN
1)
3.1.11
PENNY.WT. Pennyweights/dwt
1)
3.1.12
MILLIGR. Milligrams/mg
1)
3.1.13
PART./PD Parts per Pound//lb
1)
3.1.14
CHN.TAEL Chinese taels/tlc
1)
3.1.15
MOMME Mommes/mom
1)
3.1.16
KARAT Austrian karats/K
1)
3.1.17
TOLA Tola/tol
1)
3.1.18
BAHT Baht/bat
1)
3.1.19
MESGHAL Mesgahl/MS
1)
3.1.20
TON Tons/t 3.1.21
2.DIS.DIG. Display accuracy 3.2
ALL all digits 3.2.1*
-1.WT.CHA reduced by 1 decimal place for load change 3.2.2
RES.*10 10-fold increased resolution 3.2.14
+DIV. 2 Increase resolution by 2 scale intervals 3.2.15
+DIV. 1 Increase resolution by 1 scale interval 3.2.16
setup / WP-1 / intern. RESET Factory settings
WT.PARA Restore factory default settings 9.1
NO No 9.1.1*
YES Yes 9.1.2
setup / WP-1 / intern. ADC-CON Analog/Digital converter configuration (ADC)
1)
STANDRD. Standard
VERIF. Verifiable
SETUP / WP-1 / OFF
setup /com-1 off
setup /com-1 WP-2 Weighing platform 2
RS-232*
SBI.STd
SBI.Eich
xBPI-232
ADU-232
Menus 1.1 to 1.8 same as for WP1
Calibration/Adjustment 1.9
External calibration/adjustment; default weight* 1.9.1
External calibration/adjustment;
weight can be selected (1.18.1) 1.9.3
Internal cal/adj 1.9.4
J key locked 1.9.10
Menus 1.10 to 9.1 same as for WP1
ADC-232
Menus 1.1 to 9.1 same as for WP1
1)
Only in Service mode