105
Care and Maintenance
Service
Regular servicing by a Sartorius technician will extend the service life of your equipment and
ensure its continued weighing accuracy. Sartorius offers its customers service contracts with
regular maintenance intervals ranging from one month to two years. The frequency of the
maintenance intervals depends on the operating conditions and the operator's tolerance
requirements.
Repairs
2
Disconnect the power supply to the defective equipment immediately (unplug the power
cord from the mains supply). Repair work must be performed by authorized Sartorius service
technicians using original spare parts. Repairs performed by untrained persons may result in
considerable hazards for the user.
2
If a cable or cable gland is damaged or defective, replace the cable as a complete unit with
all its connectors.
2
Do not open the indicator while it is carrying current. Wait at least 10 seconds after
disconnecting it from power before beginning to open the equipment. Proper fitting of all
surfaces is essential for the IP rating of the housing; for this reason the device must be
opened and closed by a certified technician.
Cleaning
Indicators are designed in compliance with European Hygienic Equipment Design Group
(EHEDG) directives on suitable measures to avoid contamination, so that they are particularly
easy to clean and disinfect.
2
Disconnect the power supply to the indicator (unplug the power cord from the mains
supply). If necessary, disconnect the data cable.
2
Make sure that no liquid enters the indicator.
2
Do not use aggressive cleaning agents (solvents or similar agents).
2
Do not spray the device with water or blow with compressed air.
t Clean the indicator with a cloth lightly moistened with a soap solution.
For use in the food industry, use a cleaning agent suitable for the particular working
environment.
t Wipe the indicator with a soft, dry cloth.
To Next Page
Loading...
Need help?
General
