87
Using Individual ID Code
Example
Enter ID code names. “Batch no." and “Customer" should be entered for ID 1 and ID 2.
t Press the M key and select “Device parameters:Config.
printout:ID codes."
y The first line is selected.
t Press the a key to enter “Batch no." via the keypad, see also chapter “Operating
Design," sections “Text Input via the Keypad" and “Special Character Input via the
Keypad."
t Press the “l" soft key to save the entry.
t Press the “q" soft key to select the second line.
t Press the a key to enter “Customer" via the keypad, see also “Operating Design,"
“Text Input via the Keypad."
t Press the “l" soft key to save the entry.
t Press M or “oo" to exit the Setup menu.
Example
Enter ID code values. The values “123456" and “Smith" should be entered for ID 1 and
ID 2.
t Press the “ID" soft key.
y The first line is selected.
t Press the key to enter “123456" via the keypad, see also “Operating Design,"
“Number Input via the Keypad."
t Press the “l" soft key to save the entry.
t Press the “q" soft key to select the second line.
t Press the a key to enter “Smith" via the keypad, see also “Operating Design,"
“Text Input via the Keypad."
t Press the “l" soft key to save the entry.
t Press the “oo" soft key to exit the menu.
Operation
To Next Page
Loading...
Need help?
General
