Sartorius Combics 3 Series User Manual

73
Device Parameters
Password protection
Access to device and application parameters can be password-protected against
unauthorized changes in the Setup menu under “
Device parameters:
Password," see the “Setting up Password Protection" section in the “Operating
Design" chapter.
Acoustic Signal
An acoustic signal (single beep for active, double beep for inactive keys) is emitted when
you press a key.
The acoustic signal can be turned on/off and linked to the green LED in the Setup menu
under “
Device parameters:Operating
parameters:Acoustic signal."
Keys
Keys can be blocked/unblocked in the Setup menu under “
Device
parameters:Operating parameters:Keys." The following
settings are available:
– All keys unblocked (default setting)
– All blocked except e and H
– Alphanumeric keys blocked
– n blocked
– ( blocked
– ) blocked
– k blocked
– J blocked
– p blocked
– K blocked
– L blocked
– c blocked
– Soft key 1…5 blocked
– D blocked
– H blocked
– c blocked
Automatic shutoff of Combics
You can specify that the indicator will shut off after a set time has elapsed in the Setup
menu under “
Device parameters:Operating parameters:
Automatic shutoff
,"
Display lighting
The following settings can be made for display lighting in the Setup menu under
“
Device parameters:Operating parameters:Display:"
– Contrast
– Backlighting
– Model
Timer
The timer used to turn the device and/or display lighting on/off can be set to 2, 4, or
10 minutes in the Setup menu under “
Device parameters:Operating
parameters:Timer
."
Operation

Sartorius Combics 3 Series Specifications

General

Brand	Sartorius
Model	Combics 3 Series
Category	Accessories
Language	English