114
Documents List
Operating instructions
Basis-Applikation Programs (Option H0 and I2) 98646-003-22
Basic filling (Option H3) 98646-002-18
Filling with Extras (Option H4) 98646-002-23
ProControl Terminal (Option H6) 98646-002-34
UniCOM interfaces: 98647-004-24
Standard field bus interface 98646-002-04
Verifiable alibi memory 98647-004-40
Installation Instructions
Use in Zone 2 and 22 potentially explosive atmospheres
(option Y2) 98647-003-40
Sartorius Services
“Installation” service in Germany
Our “Installation" service package provides a range of important services that guarantee
satisfactory work from your device:
– Installation
– Commissioning
– Inspection
– Instruction
You can request these services from our customer service using the “Installation Check
No. 2" in the included warranty and service check folder.
Re-verification in Germany
Scale verification for legal metrology is valid until the end of the calendar year after next.
If the scale is used for fill level control in accordance with legislation on prepackaging,
verification is valid until the end of the following calendar year. Re-verification must
currently be carried out by a weights and measures official. Re-verification should be
requested in good time from the local Weights and Measures office. As appropriate,
please observe all statutory amendments.
Re-verification within Europe and Outside of Germany
The expiration date of the verification depends on the national regulations of the
country in which the weighing instrument is used. For information on verification and
legal regulations currently applicable in your country, and to obtain the names of the
persons to contact, please contact your local Sartorius office, dealer, or Service Center.
Further information concerning verification can be obtained from our customer service
centers.
Documents and Services
To Next Page
Loading...
Need help?
General
