Operation
Tare the scale by placing a container on the weighing platform
t Press the e key to turn on the indicator.
y The automatic self-test runs.
When the weight readout is shown, the scale is ready to operate and automatically set to
zero. With no load on the platform, you can zero the weighing platform at any time by
pressing (.
t Place empty container on the scale.
y The container weight is displayed.
t Press the ) key to tare the scale.
Note: If the automatic tare function is enabled, you do not need to press the ) key.
The tare weight is saved automatically when you place the container on the platform.
t Wait until a zero value is displayed together with the “NET" symbol (net weight).
t Place sample on the platform.
t Wait until the weight unit symbol is displayed (indicating stability).
t Read the weight value.
74
To Next Page
Loading...
Need help?
General
