75
Weighing with numeric entry of tare value and printing the results.
t Press the e key to turn on the indicator.
y The automatic self-test runs.
When the weight readout is shown, the scale is ready to operate and automatically set to
zero. With no load on the platform, you can zero the weighing platform at any time by
pressing (.
t Press the .25 key to enter a known tare weight via the keypad (in this example,
0.25 kg).
t Press the ) key to apply the tare weight.
t Place the container with sample on the platform.
t Read the results.
t Press the L key to toggle the display to the net weight value.
y The display shows the gross weight (in this example, 0.250 kg for the container plus
2.000 kg for the sample).
Operation
To Next Page
Loading...
Need help?
General
