77
Weighing with variable tare values, printing results, deleting tare values
t Press the e key to turn on the indicator.
y The automatic self-test runs.
When the weight readout is shown, the scale is ready to operate and automatically set to
zero. With no load on the platform, you can zero the weighing platform at any time by
pressing (.
t Place empty container on the scale.
t Press the ) key to tare the scale.
Note: If the automatic tare function is enabled, you do not need to press the ) key.
The tare weight is saved automatically when you place the container on the platform.
t Wait until a zero value is displayed together with the “NET" symbol (net weight).
t Place a packaged sample in the container.
t Press the .25 key to enter the known tare weight of the package via the keypad
(in this example, 0.25 kg).
t Press the ) key to apply the package weight that was entered.
Both tare weights are added together.
Operation
To Next Page
Loading...
Need help?
General
