PR 5211 Instrument Manual PR 5211 Transmitter Series
Sartorius EN-9
2.2 Transmitter Survey
- Accuracy 6000 d @ 6 samples/sec
- Internal resolution 4.8 Mio counts
- Linearity <0.002% (typ.)
- Sample rate selectable: 6 ... 100/sec
- Digital filter with selectable characteristic
- Interfaces are galvanically isolated
- 3 pairs of programmable limits
- 24 V DC Supply voltage
- Connection using 7 plug-in terminal blocks
- Connector (female) for ProfiBus
- Connector USB-B for PC
- Connection cable (1.8 m) for PC (USB 2.0; A>B)
- The unit is suitable for snap-in mounting (rail).
- 5 status LEDs for power, communication, error detection
- Calibration and configuration of the instrument are menu-
guided via PC or via ProfiBus commands.
- Calibration by means of weights or by entry of the mV/V
values without additional calculations
- Analog Output 0/4…20 mA, configurable for gross/net (PR
5211/00 and PR 5211/10 only)
- Analog Output value defined by ProfiBus (PR 5211/00 only)
- Digital Input 3 channels, galvanically isolated
- Digital Output 3 channels, galvanically isolated
Communication protocols
For the internal RS-485:
- Remote display protocol
- SMA protocol
Slave:
- PR 5211/00 ProfiBus-DP
- PR 5211/11 ProfiBus-DP
To Next Page
Loading...
Need help?
General
