Sartorius PR 5211 Series - Register 2: Status of State Controlled Action Bits; Register 3: Status of Transition Controlled Action Bits; Register 4: Calibration Information, Error Byte

ProfiBus Interface PR 5211 Instrument Manual
EN-64 Sartorius
6.2.3 Register 2: Status of State Controlled Action Bits
Only reading is allowed, the status of signals is shown.
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Byte 0
Byte 1
Byte 2
87:
GetFixTare
86:
SetFixTare
85:
ResetPWF
84:
ResetTest
83:
SetTest
82:
ResetTare
81:
SetTare
80:
SetZero
Byte 3
93:
SaveConfig
92:
GetParam
91:
SetParam
90:
SaveProcess
89:
ResetError
6.2.4 Register 3: Status of Transition Controlled Action Bits
Only reading is allowed, it is always 0.
6.2.5 Register 4: Calibration Information, Error Byte
Only reading is allowed.
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Byte 0
EXPO
Byte 1
UNIT
Byte 2
STEP
Byte 3
LASTERROR