PR 5211 Instrument Manual Commissioning
Sartorius EN-45
4.13 Status
In this menu the actual status of the weight and the digital inputs and outputs is displayed. The scale can be
tared, set to zero and switched to the test mode.
Weight
actual weight
Outputs
Status of the digital outputs 1-3
Inputs
Status of the digital inputs 1-3
Zero Offset
Zero offset from calibrated zero point. By using the set zero function the new
zero point differs from the calibrated zero point.
Switch test mode on- and off.
Tare and reset tare
Set zero
To Next Page
Loading...
