Sartorius PR 5211 Series User Manual

PR 5211 Instrument Manual Commissioning
Sartorius EN-27
4.4 Installation of ConfigureIt!
The Windows tool for the configuration/calibration of the transmitter is contained on the CD-ROM.
It can be run under Windows XP or Windows 7.
•
Connect notebook/PC and PR 5211 with the PC connecting cable
USB A/B and switch on.
• If the required driver is not found, download from the internet as
described in Chapter 4.3.
• Ensure that the necessary administrator rights are given to install
executable programs.
• Start the program 'ConfigureIt! 6.00 Setup.exe'.
• Follow the instructions given.
• Select the destination directory (e.g. C:\Programs\Sartorius\PR 5211).
• After successful installation the message: Installation finished will
appear.
• Start the program in the previously defined directory: ConfigureIt!.exe.
•
Start the program on the desktop of the notebook/PC. The connection
to the program ‚ConfigureIt!‘ is installed as a symbol on the desktop.
• At [File] the menu [Select COM Port] has to be chosen.
• The program will automatically look for the free COM ports. Select the
COM port where the PR 5211 is connected to.
• After [Ok] the connection to the instrument will be established

Sartorius PR 5211 Series Specifications

General

Brand	Sartorius
Model	PR 5211 Series
Category	Transmitter
Language	English