PR 5211 Instrument Manual Repair and Maintenance
Sartorius EN-81
7 Repair and Maintenance
Repairs are subject to checking and can be carried out only at Sartorius. In case of defect or functional
trouble, please, contact your local Sartorius organization for repair. When returning the instrument for
repair, an exact and complete fault description must be supplied. Maintenance work may be carried out only
by a trained technician aware of the involved hazards, whereby the relevant precautions must be taken.
7.1 Soldering Work
Carrying out any soldering work on the unit is not allowed, excepting the solder link (see chapter 3.2.6.5 and
3.2.6.6).
7.2 Cleaning
If necessary, the front panel can be cleaned using a damp, soft cloth. Use only little water or isopropyl
alcohol for moisturizing.
To Next Page
Loading...
Need help?
General
