Sartorius PR 5211 Series - Page 17

PR 5211 Instrument Manual Installing the Instrument
Sartorius EN-15
3.2.2.2 Connecting a PR 5110 Remote Display
Four-wire transmission, point to point, full duplex (simultaneous sending and receiving possible) with
PR 5110 remote display.
Note:
When replacing PR 1627/PR 1628 with PR 5110, note the pin assignment in Chapter 12.1!
Description see instrument manual PR 5110.
Switch settings
ON:
S1, S2, S3
OFF:
S4, S5
Configuration PR 5110
Configuration PR 5211/..
-  -  – 
-  –  - 
-  –  - 
-  –  - 
-  –  - 
[Parameter]-[Communication]: ’Remote display’
The following operations are possible from the connected remote display:
- Indicate current value type
- Set tare
- Reset tare
- Set zero