Sartorius PR 5211 Series User Manual

ProfiBus Interface PR 5211 Instrument Manual
EN-74 Sartorius
6.3.2.2 Parameter 20: Calibration Start/Stop
Write only
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2
Byte 3 Function
Function
1 StartCal
Test the CAL switch, set CalActiv
2 Factory standard
Calibration data and paramters are reset
to factory delivery status
(see chapter 4.1.2)
3 SaveAndExit
The calibration data and parameters
21...53 are stored in EAROM.
CalActiv is reset.
4 UndoAndQuitCal
All changes since start calibration are
not valid.
CalActiv is reset.
5 SetDefaultSpan
To be used to start a calibration:
All calibration data are reset, scale in
status not calibrated
FSD = 3000 kg,
stepwidth = 1,
SPAN = 1.000000 mV/V,
deadload = 0.000000 mV/V.

Sartorius PR 5211 Series Specifications

General

Brand	Sartorius
Model	PR 5211 Series
Category	Transmitter
Language	English