EasyManua.ls Logo

SATO CL4NX - Page 463

SATO CL4NX
756 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
461
Parameters related to NFC(NDEF) support (omissible)
ndd: Write user data Specify user data. Command error will occur if this is not
specified. The size information for the data area is required
before the data. For example, if the data size was 64, it
should be specified as ndd:64,abcde....
NFC: spl: Setting value
1 -
3 1
Specify the resource with UTF-8
character code.
2 -
3 2
Specify any string. Specify with
consideration of character code
and language code.
3 3 Specify the following value:
Valid
range:
0 ~ 2
0:Do the action
(Send SMS to start browser)
1:Save for later (Save process)
2:Open for editing (SMS, URI
edit)
3 4 Specify the icon data (binary
data) to hexadecimal which digit
is 2's multiples.
ver: Version For NFC:4 ~ 6, specify the handover version number to
decimal.
Specify major and minor numbers delimited by a period
character. For example, specify as ver:2.1 if the major
number is 2 and minor number is 1.
* Note: It is possible to specify 2 versions when NFC:6. One will be
reflected to Bluetooth record, and the other will be reflected to Wi-
Fi record. The version will not be reflected to Wi-Fi record if you
have specified only one.
hma: MAC Address for handover For NFC:4 ~ 6, specify the MAC address to a fixed 12-digit
hexadecimal.
* Note: It is possible to specify 2 MAC addresses when NFC:6. One
will be reflected to Bluetooth record, and the other will be reflected
to Wi-Fi record. The version will not be reflected to Wi-Fi record if
you have specified only one.
dnm: Device name For NFC:4 or NFC:5 ~ 6 (wcc:1), specify the device name.
Specify a string within 16 characters from 0~9, A~Z, a~z, -
(hyphen) and _ (underscore).
dcl: Class of Device For NFC:4, specify the device class to a fixed 6-digit
hexadecimal.
* Considering the extensibility of the function, only the digit number
is checked instead of its content.
Specify service code for the first 2 digits (refer to the table
of "Setting value of Class of Device (dcl:)" below).
Specify major device class for 3, 4 digits and the last 2
digits for minor device class (refer to the table of "Major
device classes and minor device classes of device class
(dcl:)" below).
E.g.

Table of Contents

Other manuals for SATO CL4NX

Related product manuals