SATO CL4NX - Page 464

462
Parameters related to NFC(NDEF) support (omissible)
dcl: 400204
Service code: Minor device class
Major device class
scl: Service Class UUID For NFC:4, specify more than 1 service class (refer to the
table of "Setting value of Service Class UUID(scl:)" below).
Specify to hexadecimal which digit is 4's multiples.
* Considering the extensibility of the function, only the digit number
is checked instead of its content.
E.g.
scl:111E110B
The first service class The second service class
Up to 8 service classes can be specified.
rfb: RF Bands For NFC:5 ~ 6, specify the wireless frequency band when
using Wi-Fi to a fixed 2-digit hexadecimal.
Value Encryption type
01 2.4 GHz
02 5.0 GHz
04 60 GHz
ssi: SSID For NFC:5 ~ 6, specify the recognition name of the access
point to 1 ~ 32 digits.
Usable characters are 0~9, A~Z, a~z and the following
symbols:
! " # $ % & ' ( ) * + , - . / :
; < = > ? @ [ \ ] ^ _ ` { | } ~
* Space cannot be used.
The size information of the front data delimited by a comma
is necessary. For example if the data size is 32, specify as
ssi:32,abcde... .
nky: Network Key For NFC:5 ~ 6, specify the network key of the access point
to 8 ~ 63 digits.
Usable characters are 0~9, A~Z, a~z and the following
symbols:
! " # $ % & ' ( ) * + , - . / :
; < = > ? @ [ \ ] ^ _ ` { | } ~
* Space cannot be used.
The size information of the front data delimited by a comma
is necessary. For example if the data size is 8, specify as
nky:8,AbCdEfGh.
atp: Authentication Type For NFC:5 ~ 6, specify the authentication type of the access
point to a fixed 4-digit hexadecimal.