SATO CL4NX Programming Reference

497
Parameters related to system block lock (omissible)
Note that once you lock the blocks, the locked blocks become read-only
and you cannot unlock them.
Parameters related to read after authentication of user block and subtraction register (omissible)
Note: can be used only for FeliCa Lite-S.
aar: Read after
authentication of
user block
Set a fixed 15-digit binary.
The bitmap image corresponds to the 14 scratch pad blocks (00H ~
0DH) and 1 subtraction block (0EH), and the block sequence is 00H
~ 0EH from the left.
0 1 ･･････････ D E
Scratch pad block (14 digits)
Subtraction block (1 digit)
If this parameter is specified, read after authentication can be
performed for the block specified to 1. Specify the block that does
not require read after authentication to 0.
Note that once you set to 1, the block cannot be set back to 0.
Parameters related to write after authentication of user block and subtraction register (omissible)
Note: can be used only for FeliCa Lite-S.
aaw: Write after
authentication of
user block
Set a fixed 15-digit binary.
The bitmap image corresponds to the 14 scratch pad blocks (00H ~
0DH) and 1 subtraction block (0EH), and the block sequence is 00H
~ 0EH from the left.
0 1 ･･････････ D E
Scratch pad block (14 digits)
Subtraction block (1 digit)
If this parameter is specified, write after authentication can be
performed for the block specified to 1. Specify the block to 0 when
authentication is not required for write.
Note that once you set to 1, the block cannot be set back to 0.
Parameters related to write (MAC inclusive) of user block and subtraction register (omissible)
Note: can be used only for FeliCa Lite-S.
mac: Write (MAC
inclusive) of user
block
Set a fixed 15-digit binary.
The bitmap image corresponds to the 14 scratch pad blocks (00H ~
0DH) and 1 subtraction block (0EH), and the block sequence is 00H
~ 0EH from the left.
0 1 ･･････････ D E
Scratch pad block (14 digits)
Subtraction block (1 digit)

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g