169
Configuring the Printer Driver Settings as an Administrator (Windows Vista/Server 2008)
When printing a layout created by an application software, configure the printer driver settings first.
The settings of the printer driver should be done by the administrator. If you change a setting value
or add a printer port through someone other than the administrator, an error screen appears and the
processes you operated are not reflected.
In Windows Vista/Server 2008, open the properties screen of the printer driver as an administrator with
the following procedures. The following procedures use Windows Vista as an example.
1. Open the [Printers] folder.
2. Right-click the icon of the printer you use and select [Run as administrator], and
then [Properties].
Configuring the Driver Settings
In the printer driver [Properties] > [Driver settings] tab, various settings can be configured, such as
adding media size and fonts and importing/exporting the driver settings.
To Next Page
Loading...
