SATO CL4NX - Cleaning the Optional Linerless Cutter Kit (CL4 NX Only)

Cleaning the Optional Linerless Cutter Kit (CL4NX only)
686
8. Clean the media sensor (7) using the cotton cloth dabbed with cleaning liquid.
9. Return the media sensor guide to its original position and tilt the sensor guide lock
up to the locked position.
Cleaning the Optional Linerless Cutter Kit (CL4NX only)
If the optional linerless cutter kit is installed, follow the procedure below to clean the printer:
1. Clean the media guide (1) and inner surface (2) that is in contact to the label edge
using the cotton cloth dabbed with cleaning liquid.