[Advanced]
232
Set the correction value from the standard printing position when facing the printer as "-" to adjust to
the right side and "+" to adjust to the left side.
(1) Feed direction
The setting range is from -792 to +792 dots.
• The length of 1 dot varies depending on the print resolution of the printer.
◦ 203 dpi : 1 dot = 0.125 mm (0.0049")
◦ 305 dpi : 1 dot = 0.083 mm (0.0033")
◦ 609 dpi : 1 dot = 0.042 mm (0.0017")
[Advanced]
Set detailed sensor operation and print motion.
The setting items are as follows:
Calibrate
Adjust the media sensor.
To Next Page
Loading...
