SATO CL4NX - [Ignore CR;LF]; [Ignore CAN;DLE]

[Ignore CAN/DLE]
360
• This feature is supported on printers from serial number 6B~ and above.
[Ignore CR/LF]
Set whether to ignore the CR/LF code (0x0D / 0x0A) in the received data.
The options are as follows:
Enabled
Ignore the CR/LF code.
Disabled
Do not ignore the CR/LF code.
[Ignore CAN/DLE]
Set whether to ignore the CAN/DLE code (0x10 / 0x18) in the received data.
The options are as follows:
Enabled
Ignore the CAN/DLE code.