SATO CL4NX User Manual

Canceling the Print Job
50
• When [Printing] > [Advanced] > [Prioritize] menu has been set to [Commands] and the
print settings have been specified by command, the changes made in the Adjustments
mode will be applied only to the data already analyzed at that time. The settings
specified by command will be applied to the rest of the data.
Canceling the Print Job
Cancel the print job according to the following procedure. When the print job is canceled, the data
stored in the receive buffer of the printer is also deleted.
1.
Press the button to change the printer to Offline mode.
2.
Press the button.
A message appears, confirming that you want to cancel the print job.
3.
Press the button.
The print job is canceled.

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g