Printer Memory and USB Memory
60
Printer Memory and USB Memory
The memory of the user area of the printer is a maximum of 679 MB.
However, you cannot use the whole memory of the user area, because this area is also used for the
log data and HEX dump functions.
USB memory can be connected to the printer. There is no capacity limit for USB memory.
There are two USB connectors (Type A) at front and back of the printer. USB memory can be
connected to either connectors.
What you can do with this printer while it is connected to USB memory is as follows:
• Get the HEX dump data
• Install certificates used for Wi-Fi authentication and for HTTPS
• Get the barcode check log data
• Create clone data (copy the printer settings information)
• Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
• The printer does not support USB memory with security functions such as fingerprint
authentications.
• The printer does not support connection through the USB HUB.
To Next Page
Loading...
