SATO CL4NX - When to Replace Media and Ribbon

213
When to Replace Media and Ribbon
Checking the Remaining Amount of Media and Ribbon
You can check the remaining amount of media and ribbon according to the following procedure.
• Checking through the window on the right side of the printer
You can visually check the remaining amount of media and ribbon in the printer through the window
on the right side of the printer (1).
• Checking through the notifications of the printer
The printer has Near End and End detection functions for the media and ribbon.
With icons and error messages on the display of the printer, you can check if you need to replace
the media or ribbon soon, or if the remaining amount of media and ribbon is scarce.
*Label Near End is supported on printers from serial number 6B~ and above.