Outputting a Label from an Application Software
174
Before starting the print job, confirm that the printer driver to be used in the application software is set
to the appropriate printer driver for the printer you are using.
The method for setting the printer driver varies depending on the application software. In general,
select the item you want from the list that is displayed when you select [Print] from the [File] menu, or
when you click [▼] in [Printer Name] in the dialog.
Depending on the application software. it may be necessary to select the media again in the media
selection function of the application software to use the media selected in the [Page Setup] of the
printer driver.
To Next Page
Loading...
