EasyManuals Logo

SATO CL4NX User Manual

SATO CL4NX
807 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #280 background imageLoading...
Page #280 background image
[Network]
280
You can connect a maximum of 10 devices.
When Wi-Fi Direct is active, [Device Name] cannot be changed.
[Start Group] and [Remove Group] are shown only if Wi-Fi is active and the printer is
not connected to a Wi-Fi Direct network.
[Remove Group] is shown if Wi-Fi is active and the printer is connected.
After setting up a start group, the printer will be set to the GO (Group Owner) and will
wait for a connection request from another device.
If the printer is powered off during a persistent group connection, the group will be
started automatically after the printer is powered on.
[SSID]
Set the SSID.
The screen shows the Wi-Fi network detected by the printer.
Select the name of the Wi-Fi network you want to connect using the / buttons and press the
button to confirm.
To register a Wi-Fi network manually, press the button and enter the name of the network.
You can enter a maximum of 32 characters. Alphabets (capital and small letters), numbers and
symbols can be used.

Table of Contents

Other manuals for SATO CL4NX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO CL4NX and is the answer not in the manual?

SATO CL4NX Specifications

General IconGeneral
Wi-FiNo
Ethernet LANYes
Flash memory2000 MB
Storage mediaFlash
Internal memory256 MB
Built-in barcodesCode 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity2 GB
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)30 - 90 %
Operating relative humidity (H-H)30 - 80 %
Maximum roll diameter220 mm
Maximum printing width104 mm
Printing media thickness0.06 - 0.26 µm
Display typeLCD
Product colorBlack
Display diagonal3.5 \
Display resolution320 x 240 pixels
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
USB connectorUSB Type-A / USB Type-B
Bluetooth version3.0
Serial interface typeRS-232C
USB 2.0 ports quantity2
Connectivity technologyWired & Wireless
TypePOS printer
Print speed10 ips
Print technologyDirect thermal / Thermal transfer
Maximum resolution203 x 203 DPI
Weight and Dimensions IconWeight and Dimensions
Depth457 mm
Width271 mm
Height321 mm
Weight15000 g

Related product manuals