SATO CL4NX - Page 282

[Network]
282
[Channel]
Set the communication channel.
[Channel] can be set only if you have selected [Ad-hoc] in the [Mode] menu.
The number of channels you can set varies depending on the region of the printer.
[Security]
Set the security method of the network. Set the security methods so that the printer, host and network
devices match.
The options are as follows:
• [None]
• [WEP]
• [WPA+WPA2]
• [WPA2]
• [Dynamic WEP]
If you have selected [Ad-hoc] in the [Mode] menu, only [None] and [WEP] will be available.