[Network]
320
Enable
Enable the Traps function.
SNMP Version
Set the SNMP version.
IP Version
Set the IP version to use for trap destinations.
Destinations
Set the number of trap destinations.
Destination 1
Set address 1 for the trap destination.
Destination 2
Set address 2 for the trap destination.
◦ Appears only if you have selected [2] or [3] in the [Destinations] menu.
Destination 3
Set address 3 for the trap destination.
◦ Appears only if you have selected [3] in the [Destinations] menu.
Community
Set the Traps community name.
◦ Appears only if you have selected [1] or [2c] in the [SNMP Version] menu.
User
Set the Traps user name.
◦ Appears only if you have selected [3] in the [SNMP Version] menu.
Engine ID
Set the engine ID.
◦ Appears only if you have selected [3] in the [SNMP Version] menu.
Security
Set the security level.
◦ Appears only if you have selected [3] in the [SNMP Version] menu.
Authentication Protocol
Set the authentication protocol.
◦ Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
