[Network]
332
The screen shown above appears after the standby screen (the SOS password is required if an error
occurs).
In the SOS specialized application, scan the QR code or input the information displayed on the screen.
Finally, press the button to complete SOS association.
In On-Demand Mode
A QR code and serial number appears. In the SOS specialized application, scan the QR code or input
the information displayed on the screen. Then press the button.
When a password input screen appears, input the SOS password and press the button.
The screen including the association code shown above appears. In the SOS specialized application,
scan the QR code or input the information displayed on the screen. Finally, press the button
to complete SOS association.
• To add a printer to SOS, refer to the SOS user manual.
http://www.sato-sos.com/en/support/sos_usermanual.pdf
[Copy Log Files] (SOS users only)
Copies SOS (SATO Online Services) log files to USB memory.
Appears only if you have selected [On-Demand] or [Real-Time] in the [SOS Mode] menu.
It is available only when the log data is in the printer and the USB memory is inserted into the printer.
• Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
The procedure to copy the log file is as follows:
1.
Select the file to copy and press the button. A check mark is shown on the right side of the
file name.
2.
After selecting the file, press the button to copy the selected file to the USB memory.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
