SATO CL4NX - Page 472

[Reset]
472
Select the item to be initialized using the / buttons and then press the button to
show the confirmation screen.
Press the button to cancel or button to perform the initialization.
The printer will reboot after the initialization.
• The data to be initialized are the fonts and graphics registered in the printer.
[Settings]
Select the items to be initialized.
The options are as follows:
User Reset
Initialize the setting values.
User Reset (-Interface)
Initialize the setting values, except the [Interface] menu.
Factory Reset
Initialize to the status of the factory shipment.
Factory Reset (-Interface)
Initialize to the status of the factory shipment, except the items in the [Interface] menu.