SATO CL4NX User Manual

487
Format ID Description
FAILURE
• In readable mode, this means that the barcode checker
could not read the number of printed barcode data.
• In comparison mode, this means that the read data and
print data do not match.
IGNORED This means that the data is read during a period other
than from the start to the end of checking, while the printer
is active.
IC The amount of print data as a check target
*If the check result is "IGNORED", this becomes "--".
SCSC Size of print data (bytes)
*If the check result is "IGNORED", this becomes "----".
dcdc... Print data
*If the check result is "IGNORED", nothing is output.
1
If the optional RTC kit is not installed, the system time will be output.
[Copy]
Copy the barcode check log data to the USB memory.
Available only if there is barcode check log data in the printer and if you have installed the USB
memory.
• Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
Press the button to copy the log data to the USB memory.

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g