SATO CL4NX - Error Message 1006 (Buffer Overflow)

704
Error Message 1006 (Buffer Overflow)
When there is an error with the printer, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Press the button (OFFLINE) or button.
Cause and Countermeasure
Cause (1)
The size of the received data from the host exceeds the size of the receive buffer.
Countermeasure (1)
Change the settings on the host so that data that exceeds the size of the receive buffer cannot be
sent.
Cause (2)
The interface settings between the printer and the host are incorrect.
Countermeasure (2)
Set the interface settings of the printer and host again.
Interface Menu
Contact your SATO technical support center if the error cannot be resolved.
Contact Information for When You Are in Trouble