737
Error Message 1073 (Non-RFID Warning) (CL4NX only)
When there is an error with the printer, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Press the button (CANCEL).
Cause and Countermeasure
Cause
With Non-RFID warning enabled and RFID tag loaded, the items received do not contain an RFID
issue command.
Countermeasure
◦ Add an RFID issue command to the print job.
◦ Disable Non-RFID warning.
Non-RFID Warning
◦ Replace with non-RFID label.
Contact your SATO technical support center if the error cannot be resolved.
Contact Information for When You Are in Trouble
To Next Page
Loading...
