SATO CL608 - Page 105

PN 9001024
Rev. B Jan. 2000
Page 6-8
SATO CL608 & CL612 SERVICE MANUAL
SECTION 6 – Replacement Procedures
Fig. 6-8
Fig. 6-9
REMOVE (2) SCREWS
TO DETACH THE
INTERFACE CARD
(CENTRONICS I/O
SHOWN)
REMOVE INTERFACE
CARD (CENTRONICS
I/O SHOWN)
6-4 Replacing the Power Supply
Fig. 6-10
REMOVE (4) SCREWS TO
DETACH THE OPTIONAL
MEMORY CARD
PULL AWAY THE
OPTIONAL MEMORY
CARD TO DISCONNECT
CONNECTOR FROM MAIN
CIRCUIT BOARD
Fig. 6-11