PN 9001024
Rev. B Jan. 2000
Page 1-7
SATO CL608 & CL612 SERVICE MANUAL
SECTION 1 – Overview & Specifications
MAIN PC BOARD WITH PLUG-IN
INTERFACE CARD - CENTRONICS
I/O SHOWN
POWER
SUPPLY UNIT
1-3 Components
1-4 Ribbon
Use only SATO thermal transfer ribbons which were formulated expressly for use in all
SATO printers. Use of other than approved ribbons may result in unsatisfactory print
quality and/or damage to the print head and may void your warranty.
1-5 Installation Considerations
Printer operation can be affected by the printer environment. The location of the
printer should be free from dust, humidity and sudden vibrations. To obtain optimum
results from the printer, avoid locations influenced by:
Direct or bright sunlight, since bright light will make the label sensor less responsive
and may cause the label to be sensed incorrectly.
Warm temperatures which can cause electrical problems within the printer. (See
Section 1-9, Environment.
OPTIONAL
MEMORY CARD
ADAPTER
To Next Page
Loading...
