PN 9001024
Rev. B Jan. 2000
Page 1-10
SATO CL608 & CL612 SERVICE MANUAL
SECTION 1 – Overview & Specifications
1-7 Operator Panel/Displays
LCD SCREEN: 2 LINE x 16 Character LCD
display. Used for setting operational
parameters of the printer and displaying error
conditions.
FEED KEY: Momentary switch.
Pressing this key feeds one blank
label through the printer when it is
off-line. When the printer is on-
line, another copy of the last label
will be printed.
LINE KEY: Momentary switch. Pressing
this key toggles the printer between the
on-line and off-line mode. When the
printer is on-line, it is ready to receive data
from the host. This key acts as a pause
during a print job by taking the printer off-
line.
LED's: STATUS INDICATORS
POWER LED, illuminated when power is on.
ONLINE LED, illuminated when printer is
ready to receive data. Turn ON/
OFF by toggling the LINE key.
LABEL LED, illuminated when label supply
is out.
RIBBON LED, illuminated when ribbon
motion sensor does not detect any
ribbon motion.
ERROR LED, illuminated when there is a
system fault such as an open print
head.
To Next Page
Loading...
