PN 9001024
Rev. B Jan. 2000
Page 4-15
SATO CL608 & CL612 SERVICE MANUAL
SECTION 4 – Electrical Checks and Adjustments
4-10 LCD Display Adjustment
STEP PROCEDURE
1. Turn ON the power.
2. Confirm the backlight on the LCD is lit and message is displayed.
3. Adjust the display darkness with VR4 potentiometer (located
underneath a flip-down cover of the front panel) as necessary.
Fig. 4-19
VR 4
Fig 4-19
POTENTIOMETERS ARE LOCATED
UNDERNEATH A FLIP - DOWN COVER
OF THE FRONT PANEL
To Next Page
Loading...
