SATO CL608 - Page 116

PN 9001024
Rev. B Jan. 2000
Page 6-19
SATO CL608 & CL612 SERVICE MANUAL
SECTION 6 – Replacement Procedures
Fig. 6-33
REMOVE THE
RIBBON AND
LABEL STOCK
Fig. 6-34
PLATEN
LOOSEN CLAMP AND
SCREW HOLDING
PLATEN TO FRAME
SLIGHTLY LOOSEN
ECCENTRIC SCREW
6-8 Replacing the Platen
Fig. 6-36
LOOSEN (2) IDLER SCREWS
TO RELEASE BELT TENSION
REMOVE BELT
Fig. 6-35