SATO CL608 - Page 132

PN 9001024
Rev. B Jan. 2000
Page 6-35
SATO CL608 & CL612 SERVICE MANUAL
SECTION 6 – Replacement Procedures
REMOVE SCREW TO
DETACH MEDIA HOLD
DOWN UNIT
Fig. 6-73
Fig. 6-74
REMOVE MEDIA
HOLD DOWN UNIT
FROM THE FRAME
REMOVE (2) SCREWS TO OPEN
COVER AND ACCESS THE
NOTCH/GAP SENSOR
Fig. 6-75
Fig. 6-76
Fig. 6-77
NOTCH/GAP SENSOR
6-12 Replacing the Top Half of the Notch/Gap Sensor