PN 9001024
Rev. B Jan. 2000
Page 9-16
SECTION 9 – Addendum
SATO CL608 & CL612 SERVICE MANUAL
Serial No. 81199999 and below
CL608 & CL612
Serial #8199999 and below
REMOVE SCREW TO
DETACH MEDIA HOLD
DOWN UNIT FROM THE
FRAME
REMOVE (2) SCREWS TO
REMOVE COVER AND ACCESS
THE NOTCH/GAP SENSOR
9-8 Replacing the Top Half of the Notch/Gap Sensor
Fig. 9-18
Fig. 9-19
DETACH SEN2 CONNECTOR
FROM THE PCB BOARD
WITHDRAW THE CABLE/CONNECTOR
THROUGH THE ACCESS HOLE TO
FREE THE MEDIA HOLD DOWN UNIT
Fig. 9-17
Fig. 9-20
To Next Page
Loading...
