IPE100 indicator NU-IPE100-IO-USER-E-0212
11
./HELP
- In the numeric or alphanumeric input phase, it enters, in this order, the following characters:
. , ; : # < > \ | ” % & / ( ) = ? ^ ’ [ ] { };
- HELP function, see section 4.1.4.
- If pressed in some steps or functions of the weight indicator, the display shows the keys and
their functions specific to that state of the instrument.
F1
- By entering a number through the numerical keyboard and then pressing the F1 key, one can
quickly select the customer corresponding to the entered value (the article must have already
been edited).
- If pressed for an instant it allows entering the customer database.
- If pressed at length one locks and unlocks the instrument’s keyboard (except the C key)
F2
- By entering a number through numerical keyboard and then pressing the F2 key, one can quickly
select the material corresponding to the entered value (the article must have already been
edited).
- If pressed for an instant it allows entering the material database.
- If pressed at length the weight visualization function with sensitivity x 10 is enabled.
F3
- By entering a number through numerical keyboard and then pressing the F3 key, one can quickly
select the vehicle corresponding to the entered value (the article must have already been edited).
- If pressed for an instant it allows entering the vehicle database.
- If pressed at length one can adjust the date and time of the instrument.
F4
- If pressed for an instant it allows filling in the free texts, if configured.
- If pressed at length one enters the instrument’s diagnostics menu.
F5
- Commands the data transmission to the printer serial port.
- If pressed at length one locks/unlocks the tare.
F6
- If pressed for an instant it allows carrying out an input weigh.
- Allow to scroll forwards in the menu steps or in the parameters inside a step.
- In the numeric or alphanumeric input phase, it decrements the blinking digit.
F7
- If pressed for an instant it allows carrying out an output weigh.
- Allow to scroll backwards in the menu steps or in the parameters inside a step.
- In the numeric or alphanumeric input phase, it increments the blinking digit.
F8
- If pressed for an instant it allows printing and resetting the partial total.
- In the numeric or alphanumeric input phase, it selects the digit to be modified from right to left.
F9
- If pressed for an instant it allows printing and resetting the general total.
- In the numeric or alphanumeric input phase, it selects the digit to be modified from left to right.
F10
- If pressed for an instant, it executes the printing and the zeroing of the large total.
- In the numeric or alphanumeric input phase, introduces a space between two characters.
NUMERIC
KEYBOARD
- Entry of digits or characters.
- During the weighing, these enter a numeric value with which it’s possible to:
1) Set the tare value, by pressing then the TARE key (see section 7.2).
2) To add or to subtract to the current tare the result of the operation between two values
enterable with the keyboard (See the 15.1 CALCULATOR section).
4.1.1 "2ndF" KEY: SECOND FUNCTION OF THE KEYS
In the weighing phase, by pressing the 2ndF key together with another key, it’s possible to execute various functions
(continue reading the manual for the details of the functions):
2ndF F1 Print/Clearing of Customer Total
2ndF F2 Print/Clearing of Material Total
2ndF F3 Print/Clearing of Vehicle Total
2ndF F4 Deselect databases
2ndF F5 Repetition of the last printout made
To Next Page
Loading...
