EasyManua.ls Logo

Scaime IPE100 - IPE100 Displayed Data Format

Scaime IPE100
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IPE100 indicator NU-IPE100-IO-USER-E-0212
18
4.2.2 BATTERY LEVEL INDICATION
The indicator is able to recognise whether it is powered by mains or by battery, and to indicate its charge level; to enable
the battery level indication, one should configure the << bt.LEVEL >> step.
The charge level is shown during weighing by the battery symbol.
- : charged battery.
- : partially charged battery.
- : discharged battery: connect the indicator to the mains for recharging the battery (if provided by that model) or
replacing the battery.
The indicator shows also when the battery is being recharged (if provided for the model):
RECHARGE PHASE:
COMPLETED RECHARGE:
NOTES:
- During the recharge the instrument can be normally used.
- The instrument automatically turns off when the voltage goes below the minimum level.
4.2.3 "TILT" DEVICE
The TILT is a device which inhibits the indicator’s weighing system and starts working when the instrument’s inclination is
greater than 2% for the pallet truck application or 5% for application on lift trucks.
The “tilt” message is shown on the display, alternate to the weight value.
The activation of the tilt alarm has a delay of about three seconds from the detection of the exceeding inclination.
See the electrical connection scheme (TECHNICAL MANUAL.) for the connection of the device.
4.2.4 DISPLAYED DATA
The data is displayed on two lines:
VISUALISATION WITH ENABLED DATABASES EXAMPLES
A+B FUNCTION DISABLED A+B FUNCTION ENABLED
- Indication of the selected elements
(CUS:customer/MAT:material/VEH:vehicle):
Element selected
Element not selected
- Active semiautomatic tare (PT if manual tare) or
weight on the scale 1 and 2
VISUALISATION WITH DISABLED DATABASES EXAMPLES
A+B FUNCTION DISABLED A+B FUNCTION ENABLED
- Gross weight or weight sum (A+B)
- Active semiautomatic tare (PT if manual tare) or
weight on the scale 1 and 2
1 GROSS: 100kg
TARE: 100k
g
Σ SUM: 100.0kg
1 100.0k
g
2 0.0k
g
1 CUS MAT VEH
TARE: 100k
g
1 CUS MAT VEH
PT: 100k
g
1 CUS MAT VEH
1 100.0k
g
2 0.0k
g
1 CUS MAT VEH
1 100.0k
g
2 0.0k
g

Table of Contents

Related product manuals