Scaime IPE100 - Quick Linking of the Formats; Number of Ticket Copies; Repetition of the Last Executed Printout; Standard Printing Formats

IPE100 indicator NU-IPE100-IO-USER-E-0212
43
XX in which:
XX indicates the number of the format to be linked.
• Type the format number and press ENTER.
NOTE: In order to no link any format to a vector one should enter the number 00.
14.1.1 QUICK LINKING OF THE FORMATS
By linking the number of a specific print function to the function 200 (preamble function in the << F.KEYS >> step,
TECHNICAL MANUAL.), it is possible to access directly to the modification of it with a direct key, for example F1 key to
quickly link the S.F. 1, and F2 key to quickly link the S.F. 2.
Furthermore for some print functions the desired formats can be quickly linked by setting directly the corresponding
code(function) to the desired key (<< F.KEYS >> step, TECHNICAL MANUAL.) without having to program the preamble:
CODE QUICK LINKING FUNCTION PRINT FUNCTION
200 Format linking to the Simple Printout (Prn.Fmt) S.F. 01
201 Format Linking to the Partial Total Printout (SND.FMT) S.F. 02
310 Format Linking to the Input Weigh Printout (FM.IN) S.F. 06
311 Format Linking to the Output Weigh Printout (FM.OUT) S.F. 07
312 Format Linking to the Single Weigh Printout (FM.SING) S.F. 05
TO QUICK LINK THE FORMAT:
• Recall the desired format, by pressing the linked key (<< F.KEYS >> step, TECHNICAL MANUAL.).
• The LCD display shows:
XX in which:
XX indicates the number of the format to be linked.
• Type the format number and press ENTER.
NOTE: In order to no link any format to a print function one should enter the number 00.
14.2 NUMBER OF TICKET COPIES
Through function 400, combinable with the desired key (<< F.KEYS >> step, TECHNICAL MANUAL.), any printout will be
made various times depending on the number set in this step (from 1 to 5).
14.3 REPETITION OF THE LAST EXECUTED PRINTOUT
By pressing in sequence the 2nd F and F5 keys the last executed printout is repeated; however, it’s not possible to reprint
any selected databases, and the date/time will be of the copy just reprinted.
NOTE: If one wants to execute more than one printout, it’s advisable to recall function 400 (see section 14.2).
14.4 STANDARD PRINTING FORMATS
The SEtuP >> SEriAL >> dEF.Prn parameter of the SETUP environment (TECHNICAL MANUAL.) allows to enable the
default printouts for the TPR printer.
NOTE: By enabling these printouts all the formatted print formats will be CANCELLED and will be SUBSTITUTED by the
standard formats, which automatically will be linked to the 12 print functions.