Scaime IPE100 - Cancelling Material Records from Database; Selecting and Deselecting Material Records

IPE100 indicator NU-IPE100-IO-USER-E-0212
28
11.2.3 CANCELLATION
1) Press the F2 key to access the database.
2) Select the storage to be modified:
- by using the arrow keys  
- by typing the storage number with the keyboard (the LCD display shows the first corresponding DESCRIPTION
line)
- by searching the first description (see section 11.2.7)
3) Press F3.
4) The indicator requests a further confirmation: press ENTER to confirm or another key to cancel.
5) Restart from point 2) or press C to return to weighing.
11.2.4 PRINTING
1) Press the F2 key to access the database.
2) Press the F5 key: the LCD display shows “PRINT?”. Confirm with ENTER or press another key to cancel. Here one is
given suggestions on how to print the list of the memory storages:
- By pressing the 0 key all the memory storages in the database are printed, each with:
MEMORY N°.
DESCRIPTION1
DESCRIPTION2
- By pressing the 1 key, just the memories which have been handled will be printed, each with:
MEMORY N°.
DESCRIPTION1
DESCRIPTION2
TOTAL INPUT WEIGHT = net weight of the quantity which has entered in the factory (in other words the sum of the
net weights greater than zero [so with the input weight greater than the output weight], of all the pairs and of the
single weighs carried out).
TOTAL OUTPUT WEIGHT = net weight of the quantity which has left the factory (in other words the sum of the net
weights less than zero [so with the input weight less than the output weight], of all the pairs and of the single
weighs carried out).
NET TOTAL = the net of all transactions (TOTAL OUTPUT WEIGHT minus the TOTAL INPUT WEIGHT).
WEIGHS TOTAL = number of weigh pairs (input weigh with relative output weigh) and of all the single weighs
carried out.
3) Restart from point 2) or press C to return to weighing.
11.2.5 SELECTION / DESELECTION
With no memory storage selected, the LCD display shows in the data section
(see 4.2 section ):
One can SELECT the memory storage in two ways:
1) Type the memory storage number and press F2.
2) Press the F2 key to access the database.
Select the memory storage:
- by using the arrow keys  
- by typing the storage number with the keyboard (the LCD display shows the first corresponding DESCRIPTION
line)
- by searching the first description (see section 11.2.7)
Press ENTER.
In any case, the LCD display shows in the data section (see 4.2 section ):
At this point the memory storage will be linked to the weigh under way and will be printed if foreseen in the ticket.
CUS MAT VEH
CUS MAT VEH