IPE100 indicator NU-IPE100-IO-USER-E-0212
26
To DESELECT the memory storage, one can proceed in two ways:
1) Press the F1 key to access the database.
Press 2nd F, the LCD display shows:
Press ENTER key to confirm or another key to cancel.
2) Press in sequence the 2nd F and F4 keys to deselect ALSO THE MATERIAL AND THE VEHICLE.
The LCD display shows:
Press ENTER to confirm or another key to cancel.
NOTE: Through specific print macros, it’s possible to deselect automatically the memory storage, right after the printing
(TECHNICAL MANUAL.).
11.1.6 ENTRY, MODIFICATION AND QUICK SELECTION OF CUSTOMER 000
It’s possible to directly enter temporary memory storage in order to avoid the filling in the database:
1) Press in sequence the 0 (NUMERIC) and F1.
2) The indicator allows directly filling in the memory storage 000; see section “11.1.1 ENTRY” for the data to be filled in.
3) Upon confirmation with ENTER of the last data, the memory storage will automatically be selected.
NOTES
- Upon each temporary entry, the 000 memory storage will be overwritten.
- By executing an output weigh, the last temporary entry made will always be printed.
11.1.7 ALPHABETICAL RESEARCH
The access to the ALPHABETICAL RESEARCH is possible in the following 2 ways:
1) by pressing the F1 to access the database and by pressing the F4 key;
or
2) through function 312 combinable with the desired key (<< F.KEYS >> step, TECHNICAL MANUAL.).
To search a customer:
1) Enter the desired characters to be searched in the first description of all the customers.
2) Select the desired storage in the list of the result by using the arrow keys and press ENTER.
3) Carry out one of the operation described in the previous sections.
11.1.8 HELP
By pressing the ./HELP key, it’s possible to see the keys list used in the menu.
The key list scrolls automatically. If you want to see the keys list, in manual mode, use the arrow key (F6 and F7 ).
DESELECT
CUSTOMER?
DESELECT
ALL THE ITEMS?
To Next Page
Loading...
