Scaime IPE100 - Entry, Modification and Quick Selection of Vehicle 000; Alphabetical Research; Help

IPE100 indicator NU-IPE100-IO-USER-E-0212
32
At this point the memory storage will be linked to the weigh under way and will be printed if foreseen in the ticket.
To DESELECT the memory storage, one can proceed in two ways:
1) Press the F3 key to access the database.
Press 2nd F, the LCD display shows:
Press ENTER to confirm or another key to cancel.
2) Press in sequence the 2nd F and F4 keys to deselect ALSO THE CUSTOMER AND THE MATERIAL.
The LCD display shows:
Press ENTER to confirm or another key to cancel.
NOTES:
- Through specific print macros, it’s possible to automatically deselect the memory storage, right after its printout
(TECHNICAL MANUAL.).
- The deselection of the vehicle cancels also the possible linked tare.
11.3.6 ENTRY, MODIFICATION AND QUICK SELECTION OF VEHICLE 000
It’s possible to directly enter temporary memory storage in order to avoid the filling in of the database:
1) Press in sequence the 0 (NUMERIC) and F3 keys.
2) The indicator allows directly filling in the memory storage 000; seeing section 11.3.1 “ENTRY” for the data to be filled
in.
3) Upon confirmation with ENTER of the last data, the memory storage will automatically be selected.
NOTES
- Upon each temporary entry, the 000 memory storage will be overwritten.
- By executing an output weigh, the last temporary entry made will always be printed.
11.3.7 ALPHABETICAL RESEARCH
The access to the ALPHABETICAL RESEARCH is possible in the following 2 ways:
1) by pressing the F3 to access the database and by pressing the F4 key;
or
2) through function 314 combinable with the desired key (<< F.KEYS >> step, TECHNICAL MANUAL.).
To search a vehicle:
1) Enter the desired characters to be searched in the plate of all the vehicles.
2) Select the desired storage in the list of the result by using the arrow keys   and press ENTER.
3) Carry out one of the operation described in the previous sections.
11.3.8 HELP
By pressing the ./HELP key, it’s possible to see the keys list used in the menu.
The key list is automatically. If you want to see the keys list, in manual mode, use the arrow key (F6  e F7 ).
DESELECT
VEHICLE?
DESELECT
ALL THE ITEMS?