IPE100 indicator NU-IPE100-IO-USER-E-0212
41
CUSTOMER TOTAL - Programmable printout -
By pressing the 2nd F key followed by F1, the CUSTOMER TOTAL is printed and then cleared as well as the printing of the
format linked to the S.F.08 function. Please find below the default printout:
DESCRIPTION1
DESCRIPTION2
DESCRIPTION3
TOTAL INPUT WEIGHT = net weight of the quantity which has entered in the factory (in other words the sum of the
net weights greater than zero [so with the input weight greater than the output weight], of all the pairs and of the single
weighs carried out).
TOTAL OUTPUT WEIGHT = net weight of the quantity which has left the factory (in other words the sum of the net
weights less than zero [so with the input weight less than the output weight], of all the pairs and of the single weighs
carried out).
NET TOTAL = the net of all transactions (TOTAL OUTPUT WEIGHT minus the TOTAL INPUT WEIGHT).
WEIGHS TOTAL = number of weigh pairs (input weigh with relative output weigh) and of all the single weighs
carried out.
MATERIAL TOTAL - Programmable printout -
By pressing the 2nd F key followed by F2, the MATERIAL TOTAL is printed and then cleared as well as the printing of the
format linked to the S.F.09 function. Please find below the default printout:
DESCRIPTION1
DESCRIPTION2
TOTAL INPUT WEIGHT = net weight of the quantity which has entered in the factory (in other words the sum of the
net weights greater than zero [so with the input weight greater than the output weight], of all the pairs and of the single
weighs carried out).
TOTAL OUTPUT WEIGHT = net weight of the quantity which has left the factory (in other words the sum of the net
weights less than zero [so with the input weight less than the output weight], of all the pairs and of the single weighs
carried out).
NET TOTAL = the net of all transactions (TOTAL OUTPUT WEIGHT minus the TOTAL INPUT WEIGHT).
WEIGHS TOTAL = number of weigh pairs (input weigh with relative output weigh) and of all the single weighs
carried out.
VEHICLE TOTAL - Programmable printout -
By pressing the 2nd F key followed by F3, the VEHICLE TOTAL is printed and cleared as well as the printing of the format
linked to the S.F.10 function. Please find below the default printout:
DESCRIPTION
PLATE
TARE
TOTAL INPUT WEIGHT = net weight of the quantity which has entered in the factory (in other words the sum of the
net weights greater than zero [so with the input weight greater than the output weight], of all the pairs and of the single
weighs carried out).
TOTAL OUTPUT WEIGHT = net weight of the quantity which has left the factory (in other words the sum of the net
weights less than zero [so with the input weight less than the output weight], of all the pairs and of the single weighs
carried out).
NET TOTAL = the net of all transactions (TOTAL OUTPUT WEIGHT minus the TOTAL INPUT WEIGHT).
WEIGHS TOTAL = number of weigh pairs (input weigh with relative output weigh) and of all the single weighs
carried out.
PARTIAL TOTAL - Programmable printout -
By pressing the F8 key the PARTIAL TOTAL is printed and then cleared as well as the printing of the format linked to the
S.F.02 function.
GENERAL TOTAL - Programmable printout -
By pressing the F9 key the PARTIAL TOTAL is printed and then cleared as well as the printing of the format linked to the
S.F.03 function.
To Next Page
Loading...
